Migrate to Gigabit Ethernet in a Cost-Effective Manner

Used in conjunction with lower cost 1000BASE-T switches, companies can take advantage of the high bandwidth Gigabit Ethernet offers without all of the higher costs.

Transition Networks’s 1000BASE-T to SX/LX converters allow users to extend the bandwidth to those users outside the reach of the 1000BASE-T standard (up to 125 km).

Features

Auto-Negotiation (802.3u) (Copper & Fiber)
Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
Transparent Link Pass Through
Transparent Link Pass Through sends a link-loss signal over the fiber, instructing the remote converter to shut down the copper port—thus notifying the end device—while maintaining the fiber link between the two converters.
Automatic Link Restoration
Transition Networks's converters will automatically re-establish link in all network conditions.
Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
Remote Fault Detect

Specifications

Standards	IEEE Std. 802.3ab™ and IEEE Std. 802.3™
Fiber Optic Connector Specs
Multimode	Min TX PWR: -10.0 dBm Max TX PWR: -3.0 dBm RX Sensitivity: -17.0 dBm Max In PWR: -3.0 dBm Link Budget: 7.00 dB
6-position Switch	SW1: Remote Fiber Fault Detect (Down=Enabled)  SW2: Symmetric Pause  SW3: Asymmetric Pause  SW4: Transparent Link Pass Through (UP=Enabled)  SW5: Fiber Auto-Negotiation (Down=Enabled)  SW6: Loopback (Down=Enabled)
Status LEDs	PWR (Power): Steady green LED indicates connection to external AC power  RXF (Fiber receive): Flashing LED indicates reception of data on fiber link  LKF (Fiber link): Steady LED indicates fiber link connection  RXC (Copper receive): Flashing LED indicates reception of data on copper link  LKC (Copper link): Steady LED indicates copper link connection
Dimensions	Width: 3.25" [82 mm]  Depth: 4.8" [122 mm]  Height: 1.0" [25 mm]
Power	External AC/DC required; 12V DC, 1.5A; unregulated; standard
Environment	0 – 50° C operating; 5% – 95% humidity non-condensing; 0 – 10,000 feet altitude
Shipping Weight	2 lbs. [0.90 kg]
Safety Compliance	Wall Mount Power Supply: UL Listed, C-UL Listed (Canada)
Regulatory Compliance	FCC Class A, CISPR22/EN55022 Class A, EN55024, EN61000, CE Mark
Warranty	Lifetime