The "Just Convert-IT™" Bridging Media Converter is an inexpensive, no frills way to extend the distance between connections with different speeds or duplex using fiber optic cable; while maintaining the same quality and reliability found on Transition's full-featured line of products.

Connect Legacy Networking Equipment:

Connect an existing 10Mbps device to 100Mbps devices.

Eliminate Collision Domains:

Connect two half-duplex hubs with a full-duplex connection over fiber containing no collisions.

Features

Unit and Port LEDs allow for quick status information.

Auto-Negotiation (802.3u)

Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.

AutoCross™

Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
Ability to force 10Mbps or 100Mbps (TP port) and full or half-duplex on both copper and fiber.

Automatic Link Restoration

Transition Networks's converters will automatically re-establish link in all network conditions.

Specifications:

Standards	IEEE Std. 802.3™, IEEE Std. 802.3ab™
Switches	SW1: Auto-Negotiation On/Off  SW2: Half or Full-duplex (Copper)  SW3: 10Mpbs or 100Mbps (Copper)  SW4: Half or Full-duplex (Fiber)
Status LEDs	PWR (Power): On = connection to external power  LNK Act (Fiber Link/Activity): On = Link; Blinking = Activity  FD (Fiber Duplex): On = Full-duplex;Off = Half-duplex  LNK Act (Copper Link/Activity):  On = Link; Blinking = Activity  FD: (Copper Duplex):  On = Full-duplex; Off = Half-duplex  100 (Copper Speed):  On = 100Mbps; Off = 10Mbps
Dimensions	Width: 3.0" [76 mm]  Depth: 3.9" [100 mm]  Height: 1.0" [25 mm]
Power	External AC/DC; +12VDC, 0.5A min.
Power Consumption	2.5 watts
Environment	0 – 50°C, 5% – 95% humidity non-condensing, 0 – 10,000 ft. altitude
Shipping Weight	1 lb. [0.45 kg]
Safety Compliance	Wall Mount Power Supply:  UL Listed and CSA certified
Regulatory Compliance	FCC Class A, CISPR22/EN55022 Class A, EN55024, CE Mark
Warranty	Lifetime