Extend Network Distance

Two 10BASE-T to 10BASE-FL Media Converters used back-to-back extend the distance between two 10BASE-T devices up to 5 km using multimode fiber or up to 40 km using single mode fiber without a repeater.

Connect Unlike Devices

Connect your workgroup to a distant server or a central switch; or extend distances between like and unlike devices in either full or half-duplex modes.

Features

Integrate mixed cabling environments using either switched or shared Ethernet.

AutoCross™

Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.

Link Pass Through

Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.

Specifications:

Standards	IEEE Std. 802.3™ 10BASE-T; 10BASE-FL
Fiber Optic Connector Specs
Multimode	Min TX PWR: -19.0 dBm Max TX PWR: -15.0 dBm RX Sensitivity: -32.5 dBm Max In PWR: -14.0 dBm Link Budget: 13.50 dB
Switch	S1: Enables/disables Link Pass Through
Status LEDs	PWR (Power): On indicates connection to external AC power Link: On indicates unit is receiving link pulses from a compliant device RX (Receive): On indicates packets are being received
Dimensions	Width: 3.0" [76 mm]  Depth: 3.9" [99 mm]  Height: 1.0" [25 mm]
Power	External AC/DC required; 12VDC, 0.5A; unregulated; standard
Environment	0 – 50°C; 5% – 95% humidity non-condensing; 0 – 10,000 ft. altitude
Shipping Weight	2 lbs. [0.90 kg]
Safety Compliance	Wall Mount Power Supply:  UL listed and CSA certified
Regulatory Compliance	FCC Class A, CISPR22/EN55022 Class A, EN55024, EN61000, CE Mark
Warranty	Lifetime