Features

Extend Network Distance

Bridge legacy 10/100 devices to a Gigabit backbone

Secure Uni-directional transmission

Auto-Negotiation (copper and fiber ports)

Switch Selectable Speeds (UTP) when Auto-Negotiation is off

AutoCross™
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.

Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.

Remote Fault Detect

Pause

Automatic Link Restoration
Transition Networks's converters will automatically re-establish link in all network conditions.

IEEE 802.1P QoS, IPv4
Tos/Diffserv, IPv6 traffic class

IEEE 802.1q VLAN tagging and double tagging (Q in Q)
Remote Firmware Upgrade

Virtual Cable Test (VCT) on UTP port

Unidirectional data transmission

allows secure traffic forwarding in only one direction

Bandwidth Allocation

DMI, Digital diagnostics per SFF-8472

RMON Counters for each port

Specifications:

Standards	IEEE 802.3™, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z, IEEE 802.1P, IEEE 802.1q
Data Rate	Copper: 10/100/1000 Mbps  Fiber: 1000 Mbps
Filtering Addresses	8K MAC Addresses
Max Frame Size	802.3ac tagged: 1628 bytes  untagged: 1632 bytes
Fiber Optic Connector Specs
Single Mode	Min TX PWR: -13.0 dBm Max TX PWR: -3.0 dBm RX Sensitivity: -20.0 dBm Max In PWR: -3.0 dBm Link Budget: 7.00 dB
Status LEDs	PWR: ON green = Power applied to card  TP (Duplex/Link/Activity):  Orange: ON = Half-duplex Link; BLINK = Activity;  Green: ON = Full-duplex Link; BLINK = Activity  TP (10Mbs/100Mbs/1000Mbs):  Off = 10Mbs; Orange = 100Mbs; Green = 1000Mbs  LACT (Fiber Link/Activity):  Green: ON = Link; BLINK = Activity
Dip Switches	Switch 1: TX - Enable/Disable Auto-Negotiation  Switch 2: TX - Force 10Mbs or 100Mbs with Switch 1 off  Switch 3: TX - Force Half or Full duplex with Switch 1 off  Switch 4: Enable/Disable LPT  Switch 5: not used  Switch 6: not used
Dimensions	Width: 0.86" [22 mm]  Depth: 5.0" [127 mm]  Height: 3.4" [86 mm]
Power Consumption	4.8 watts
Environment	See chassis specifications
Shipping Weight	1 lb. [0.45 kg]
Regulatory Compliance	CISPR/EN55022 Class A, EN55024, EN61000, FCC Class A, CE Mark
Warranty	Lifetime