Stackable Switches Designed for Small, Growing Businesses

Small and growing companies “bet the business” on their network, depending on it as the essential nerve center for applications, VoIP phones, videoconferencing, and much more. Businesses with 40-150 users want full-featured network switches that can support the full range of network applications, but without enterprise-class pricing, training, and support requirements. The ProSafe Stackable Smart Switch family delivers the flexibility, reliability, and performance growing businesses need at very affordable prices – in an easy-to-use package. Each ProSafe Stackable Smart Switch comes with 24 or 48 10/100 ports and four Gigabit ports. Up to 24 ports of Power over Ethernet (PoE) are also available, making these switches ideal for deploying wireless access points, VoIP phones, and surveillance cameras. Two of the Gigabit Ethernet ports offer the option of fiber connectivity via small form-factor pluggable (SFP) GBIC** slots for long distance links. A 4 Gbps, dual-ring, resilient stacking architecture provides the highest reliability, while allowing you to mix and match to stack up to six units or 192 10/100 ports - and easily manage them all at a single IP address!

The popular intuitive, Web-browser interface offers the Smart Switch management, making it a snap to monitor stack performance, configure ports, even set up port trunks, VLANs, and traffic prioritization. In addition, the ProSafe Stackable Smart Switches expand on the current ProSafe Smart Switch feature set by adding 801.x security, SNMP v2c and v3 support, logging, ratelimiting and Layer 3 prioritization. Why buy stackable network switches designed and priced for the enterprise? NETGEAR ProSafe Stackable Smart Switches are designed for small and growing businesses – they are easy to buy and use, with all of the features you need!

Versatile

Expand your network as you grow your business, adding switches to the stack as you need them. Use PoE ports to simplify the installation and management of wireless access points, VoIP phones, and security cameras.

Powerful

Gigabit ports provide high-speed connectivity when you add more servers, or link in power users. Use copper connections, or two SFP GBIC fiber slots provide optional fiber connectivity for greater distance. The non-blocking design of the switches deliver simultaneous, full wirespeed, low-latency throughput to all ports. Advanced feature set delivers the security, reliability, prioritization, and monitoring capabilities small businesses need.

Reliable

All ProSafe Stackable Smart Switches are made to last, with NETGEAR Lifetime Warranty and available Premium Support Packs. Redundant stacking features deliver maximum availability.

Easy

Manage all ProSafe Stackable Smart Switches as though they are one unit from an easy-to-use Web console. Optimized for ProSafe Network Management Software (NMS100) and works with other SNMP-based management software. Shipped ready to go straight out of the box, NETGEAR delivers switching that is easy to set up, stack-up, and use.

Specifications

Network Protocol and Standards Compatibility

IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
IEEE 802.3x full-duplex flow control
IEEE 802.3af power over Ethernet (FS752 TPS)

Interfaces

FS728TS: 24 10/100 Mbps auto sensing switching ports
FS752TS/FS752TPS: 48 10/100 Mbps auto sensing switching ports
FS752TPS: 48 10/100 Mbps Ports of which 24 support PoE
4 Built-in RJ-45 Gigabit Ethernet ports for 10/100/1000 Mbps connectivity
2 SFP slots for fiber Gigabit Ethernet modules
Auto-sensing and auto-negotiating capabilities for all ports
Auto Uplink™ on all ports to make the right connection

Administrative Switch Management

IEEE 8021.Q VLAN (128 groups, static)
IEEE 802.1p Class of Service (CoS)
Port-based QoS
IEEE 802.3ad link aggregation (LACP)
IEEE 802.1D Spanning Tree Protocol
SNMP v1, v2c, v3
DSCP Layer 3 QoS
Guest VLAN
ACL – MAC address
RFC 1213 MIB II
RFC 1643 Ethernet interface MIB
RFC 1493 bridge MIB
RFC 2131 DHCP client
IEEE 802.1x
Port-based security by locked MAC addresses
Storm control for broadcast, multicast and unknown unicast packets
Port-based ingress/egress rate limiting
SNTP
RMON group 1, 2, 3, 9
Private enterprise MIB
Port mirroring support
Web-based configuration
Configuration backup/restore
Password access control
Firmware upgradeable

Performance Specifications

Forwarding modes: Store-and-forward
Bandwidth: 12.8 Gbps for FS728TS, 17.6 Gbps for FS752TS/FS752TPS
Network latency: Less than 20 microseconds for 64-byte frames in store-and-forward mode for100 Mbps to 100 Mbps transmission
Buffer memory: 128 KB
Address database size: 8,000 media access control (MAC) addresses per system
Addressing: 48-bit MAC address
Mean time between failure (MTBF): 100,000 hours (~11 years) for FS728TS; 83,000 hours (~9 years) for FS752TS; 114,700 (~13 years) for FS752TPS

LEDs

Unit: Power, master, stack ID
Per port: Link, speed, activity
Per Gigabit port: Link, speed, Activity, Stack
FS752TPS: PoE Max, PoE active, PoE fault

Power Supply

Power Consumption:

FS728TS: 17.37 Watts
FS752TS: 22.3 Watts
FS752TPS: 249 Watts
100-240VAC/50-60Hz universal input
FS752TPS PoE power budget: 180W

Physical Specifications

Dimensions (h x w x d): 43.2 x 440 x 257 mm (1.70 x 17.32 x 10.12 in)
Weight:
FS728TS: 2.6 kg (5.73 lb)
FS752TS: 2.98 kg (6.57 lb)
FS752TPS: 4.05 kg (8.91 lb)

Environmental Specifications

Operating temperature: 32° to 104° F (0° to 40° C)
Storage temperature: -4° to 158° F (-20° to 70° C)
Operating humidity: 90% maximum relative humidity, non-condensing
Storage humidity: 95% maximum relative humidity, non-condensing
Operating altitude: 10,000 ft (3,000 m) maximum
Storage altitude: 10,000 ft (3,000 m) maximum

Electromagnetic Compliance

CE mark, commercial
FCC Part 15 Class A
VCCI Class A
EN 55022 (CISPR 22)
EN 55024 (CISPR 24)
C-Tick

Safety

CE mark, commercial
CUL 60950 (Listed)/ EN60950 (Low Voltage Directive)

Warranty

NETGEAR Lifetime Warranty†

ProSupport™ Service Packs Available

FS728TS/FS752TS

OnCall 24x7, Category 1
PMB0331-100 (US)
PMB0331 (non-US)
XpressHW, Category 1
PRR0331

FS752TPS

OnCall 24x7, Category 2
PMB0332
XpressHW, Category 2
PRR0332-100

Modules

AGM731F ProSafe 1000BASE-SX SFP GBIC: Module with LC connectors for 50um or 62.5um multi-mode fiber cable
AGM732F ProSafe 1000BASE-LX SFP GBIC: Module with LC connectors for 9um single-mode fiber cable
AGM733 ProSafe 1000BASE-ZX SFP GBIC: Module with LC connectors for 9um single-mode fiber cable

Package Contents

Prosafe 24/48 Stackable Smart Switch with 4 Gigabit Ports (FS728TS, FS752TS or FS752TPS)
Rubber footpads
Power cord
Rack-mount kit
Resource CD-installation guide
Warranty/support information card