This Attachment Unit Interface (AUI) transceiver provides a method for connecting a workstation, or any other device with an AUI port, to twisted pair cabling in a 10BASE-T network. Devices with AUI ports could include: servers, hubs, bridges and routers. The E-TBT-MC05 transceiver allows twisted pair, UTP or STP, to be connected to these AUI ports.

Features

Provides a complete interface of the AUI to Ethernet UTP cable.
Supports data transfer rate of 10Mbps
CSMA/CD access mechanism
Capable of driving the UTP cable segment up to 100 meters (328 ft.) without the use of a repeater
Selectable Link test and SQE test functions
AUI locking post design allows the E-TBT-MC05 to directly attach to a host’s AUI connector
Can be used with or without an AUI cable
LED indicators for network monitoring and diagnosing
The RJ-45 port will automatically detect and reverse the polarity on the receive pair if needed.

Specifications:

Standards	IEEE Std. 802.3™ 10BASE-T
Status LEDs	COL: Blinks when detecting collisions  STAT: Solid Green: UTP Link  established; Blinks Green: No UTP Link; 4-Blink Pattern: Polarity reversal detected on UTP cable  TX: Blinks when transmitting data on the RJ-45  RX: Blinks when receiving data on the RJ-45
Switches	SW1: SQE Test: Up is enabled  SW2: Link Test: Up is enabled  SW3: Half or Full-Duplex: Up is for Half, Down is for Full
Dimensions	Width: 3.1" [79 mm]  Depth: 0.8" [20 mm]  Height: 1.7" [43 mm]
Power	No external power required
Input Power	10.2 to 15.75 VDC
Input Current	250mA@12VDC
Power Consumption	Not to exceed 75mA@12VDC
Environment	0 – 50°C, 5% – 95% humidity noncondensing, 0 – 10,000 ft. altitude
Shipping Weight	1 lb. [0.45 kg]
Compliance	FCC & CISPR Class A, CE Mark
Warranty	Lifetime

• Standards IEEE Std. 802.3™ 10BASE-T
• Status LEDs COL: Blinks when detecting collisions
• STAT: Solid Green: UTP Link established; Blinks Green: No UTP Link; 4-Blink Pattern: Polarity reversal detected on UTP cable
• TX: Blinks when transmitting data on the RJ-45
• RX: Blinks when receiving data on the RJ-45
• Switches SW1: SQE Test: Up is enabled
• SW2: Link Test: Up is enabled
• SW3: Half or Full-Duplex: Up is for Half, Down is for Full
• Dimensions Width: 3.1" [79 mm]
• Depth: 0.8" [20 mm]
• Height: 1.7" [43 mm] Power No external power required
• Input Power 10.2 to 15.75 VDC
• Input Current 250mA@12VDC
• Power Consumption Not to exceed 75mA@12VDC
• Environment 0 – 50°C, 5% – 95% humidity noncondensing, 0 – 10,000 ft. altitude Shipping Weight 1 lb. [0.45 kg]
• Compliance FCC & CISPR Class A, CE Mark
• Warranty Lifetime