The Full/Half-Duplex 10BASE-FL Transceiver
provides low cost network migration options.
Extend Network
Distances
Extend connection distances between hubs and
workstations by incorporating fiber optic technology into your
network.
Features
Available in
both multimode and single mode fiber optic versions.
Link Pass
Through
Link Pass Through is a troubleshooting feature that allows the
transceiver to monitor both the fiber and copper RX ports for loss of
signal.
Single mode version supports segments up to 15,000 meters in
length.
Both multimode and single mode transceivers connect AUI male (DB-15)
nodes to a fiber optic medium via a standard ST type connector in both full and
half-duplex modes. The ability to operate in full-duplex mode allows for
operation between switches, routers and servers using full-duplex
Ethernet.
Multimode version takes advantage of full duplex transmission to
increase data rates between devices up to 20 Mbps.
Long-Haul version,
E-FRL-MC05(L), uses a 1300nm LED rather than the standard 850nm LED, so it can
transmit and receive data over distances up to 5,000 meters. That's almost a
3,000-meter advantage over the standard 10BASE-FL distance of 2,000
meters.
Specifications:
| Standards |
IEEE Std.
802.3™ |
| Connectors |
1 AUI male (DB-15); 1 duplex
fiber optic |
| Fiber Optic Connector Specs |
| Switches |
Position 1:
On/Off selectable SQE testing for NICs and hubs that support SQE
Position 2:
LinkAlert On/Off control
Position 3:
Half/Full-Duplex mode control |
| Status
LEDs |
Status: Steady
on indicates normal operation; Blinking once indicates link down; Blinking
twice indicates AUI packets are too long (local jabber); Not lit indicates
no connection to external power.
Collision:
Flashing or lit LED indicates collisions are occurring.
Receive: Flashing
or lit LED indicates packets are being received.
Transmit:
Flashing or lit LED indicates a packet has been
transmitted. |
| Dimensions |
Width: 1.65" [42 mm] Depth: 3.8" [95 mm] Height: 0.94" [24
mm] |
| Environment |
0 – 40°C; 10% – 90% humidity
non-condensing; 0 – 10,000 feet altitude |
| Shipping
Weight |
1 lb. [0.45 kg] |
| Compliance |
UL Listed; FCC & CISPR
Class A; CE Mark |
| Warranty |
Lifetime |
Especificacoes: